8835 Journeyman Steamfitter

POSITION IDENTIFICATION

TITLE Journeyman Steamfitter

CLASSIFICATION NUMBER 8835

GRADE 27

CLASSIFICATION Nonexempt

IMMEDIATE SUPERVISOR Designated Foreman

MAJOR ADMINISTRATOR Facilities Operations Manager

GENERAL FUNCTION

The Journeyman Steamfitter maintains the heating, gas, and chill water distribution systems by performing skilled technical work in the installation, repair, replacement, and maintenance of high and low pressure steam piping systems, heating water systems, gas piping (both threaded and fusion welded), chill water distribution piping and valves, and condensate pipe systems in all University structures following recognized procedures and techniques of the steamfitter trade.

MINIMUM ACCEPTABLE QUALIFICATIONS

Education: A high school diploma or the equivalent is required. Completion of a steamfitter or pipefitter training program at a vocational or technical school or a recognized apprenticeship program in the steamfitter or pipefitter trade is required.

Experience: At least six years of experience working as a steamfitter is required.

Skills: General mechanical ability including skills in the use of welding equipment, acetylene torch equipment, pipe locators, related steamfitter tools, small hand and power tools, and mechanical equipment and materials applicable to the steamfitter trade is required. The ability to interpret wiring diagrams, blueprints, and schematics is required. The ability to locate underground piping and document piping locations on blueprints is required. A working knowledge of building and piping codes is required. Computer literacy is required. The ability to develop knowledge of, respect for, and skills to engage with those of other cultures or backgrounds is required.

Effort: Must be able to lift and carry materials and equipment weighing up to fifty pounds on a frequent basis and up to 100 pounds on an occasional basis. Prolonged standing and frequent bending, stooping, and reaching are required on a daily basis. A full range of physical motion is required in order to operate manual and electrically-powered tools and steamfitter equipment. The ability to move throughout campus, including climbing stairs in all University buildings, is required. The ability to tolerate working for extended periods in confined and narrow spaces, such as utility tunnels, is required. The work is performed indoors and out-of-doors, occasionally in environments that are dusty, noisy, or which could have work hazards. Some positions in this job classification (job title) are designated as essential employees who must report to work as scheduled when University offices are closed due to severe weather; the supervisor will communicate whether the particular position is considered essential and under what situations.

License: A Journeyman Steamfitter’s license with documented welding certifications or an equivalent license with documented welding certifications, such as Licensed Pipefitter, Licensed Welder with 6-G Test, or Licensed Welder with Nuclear Certification, is required.

Other: A valid Missouri driver’s license is required. The scope of the position requires exposure to and the use of chemicals, solvents, and cleaners common to steamfitter work that may be hazardous and/or cause injury if specific instructions regarding their mixture, use, and disposal/storage are not properly followed.

ESSENTIAL DUTIES AND RESPONSIBILITIES

1. Performs journeyman-level work in the installation, repair, replacement, and maintenance of high- and/or low-steam piping, heating water lines, threaded and fusion-welded gas lines, chill water piping, and condensate piping in all University structures by inspecting the work site to determine the materials, equipment, tools, and methods to be used, locating underground piping as required, developing a plan or layout for the work, updating and following blueprints, sketches, or schematics, and assembling, building, repairing, rebuilding, modifying, or installing materials and equipment as required by the scope of work.

2. Completes assigned projects with quality workmanship by using hand or power tools, such as, welders, acetylene torches, soldering and welding tools, pipe threaders and cutters, gas leak detectors, pipe locators, and appropriate chemicals to cut and join threaded and fusion-welded pipes and install, alter, or rebuild piping, gas lines, valves, traps, drains, and other related steamfitter fixtures and equipment.

3. Recommends the use of additional departmental personnel or contract personnel (as appropriate) to meet assigned completion dates.

4. Repairs and replaces damaged steam and heating piping, valves, traps, drains, baskets, and gauges and connects them to piping by adjusting pumps, regulators, and associated piping, threading, bending, or fusion welding pipe by hand or by using power equipment, screwing, bolting, or fitting gaskets, couplings, traps, and valves, and soldering, lead wiping, and/or acetylene cutting and welding connections to seal joints where necessary.

5. Provides access to route pipes through walls, floors, and other structures as may be required by dismantling or cutting through structural and other physical barriers in order to gain access for repairs and new installations.

6. Protects University property and equipment from damage during assigned work by removing furniture, wall fixtures, and equipment from work sites if possible or covering immoveable items with protective cloths, covering floors with cloths or tarpaulins, and erecting scaffolding or support structures in a manner that prevents damage.

7. Restores assigned work sites to their original condition at the completion of work by removing scaffolding or support structures, drop cloths, and tarpaulins used during the project, returning furniture and equipment to their proper location, setting up equipment that had been dismantled, and coordinating the painting, plastering, or replacing tile and other structural alterations made to accommodate pipes.

8. Assists with documenting the cost of repairs by keeping records of time and materials to be charged to each job by using the work order system and providing periodic status reports to the designated supervisor regarding the status of work projects, material consumed, and work-hours utilized.

9. Practices preventative maintenance of steamfitter tools and equipment by performing spot checks of equipment to determine their working condition, oiling moving parts, cleaning and servicing tools and equipment as directed or specified in the operator’s manual, and returning damaged tools and equipment for repair or replacement.

10. Provides technical assistance in the purchase of new or replacement steamfitter tools and equipment by being knowledgeable of the capabilities of various types of equipment and recommending the purchase of steamfitter tools and equipment that meet the needs of the maintenance department.

11. Reduces the likelihood for liability regarding the University’s compliance with federal regulations by complying with policies, laws, and regulations governing environmental protection, safety, hazardous waste disposal, and the use of chemical substances and materials common to steamfitter work.

12. Contributes to an accident-free work environment by complying with operator’s instructions for the use of power tools, wearing protective gear such as goggles, hearing protectors, back supports, and work gloves, reporting incidents of unsafe work activity to supervisors, and following standard safety precautions during work.

13. May work on steamfitting projects located in student dormitory rooms, common areas, and private and common bathrooms.

14. Remains competent and current through self-directed professional reading, attending professional development courses, and attending training and/or courses as required by the supervisor.

15. Contributes to a work environment that encourages knowledge of, respect for, and development of skills to engage with those of other cultures or backgrounds.

16. Contributes to the overall success of Facilities Management by performing all other duties as assigned.

SUPERVISION

The Journeyman Steamfitter is supervised by the designated Foreman and may supervise others working on steamfitter projects.

OFFICE OF HUMAN RESOURCES

REVISED JANUARY 2017

Loading